Инструменты пользователя

Инструменты сайта


axapta:кластерaos

Различия

Здесь показаны различия между двумя версиями данной страницы.

Ссылка на это сравнение

axapta:кластерaos [2018/04/13 22:43] (текущий)
Строка 1: Строка 1:
 +Раздел:​ [[Программирование | ]] > [[СредаИсполнения | ]] > [[ТрехуровневаяКонфигурация]]
 +----
 +[[:​НадоПеревести]]
  
 +by Preston A. Larimer <​palarimer@usa.net>​
 +
 +===Setting up the Axapta Cluster environment===
 +
 +
 +The Axapta Object Server environment offers a load balancing feature -
 +called the Axapta Object Server Cluster. A number of object servers can be
 +assigned to the same Axapta Object Server Cluster. A client be configured to
 +connect to a Cluster. It will then choose the server with the lowest number
 +of on-line users. With this approach the Axapta Object Server Environment
 +can also be made fault tolerant. If an Object Server fails, a client can
 +immediately connect to one of the other servers in the same cluster.
 +
 +
 +===Axapta object server cluster===
 +
 +
 +The Axapta Object Server cluster environment is build to provide load
 +balancing and fall back. An Axapta Object Server can be specified to belong
 +to a specific cluster. ​ If the same cluster name is given for a number of
 +object servers they all belong to the same cluster. A user can be specified
 +to connect to a given cluster. ​
 +
 +Suppose a number of servers are set up in the same cluster - named AOSC.
 +They should all use the same application and database, and in other aspects
 +have the same settings. All clients connecting to the AOSC should be
 +specified to search for servers belonging to this cluster, otherwise the
 +load balancing mechanism will not work properly. A client starting up
 +against an Axapta Object Server Cluster will start out by broadcasting an
 +UDP package requesting Axapta Object Servers fulfilling names and IP server
 +masks given in the client settings to respond. It is therefore vital that
 +firewalls allows such packages to pass through. The client will receive
 +answers from all Object Servers with information on object server name and
 +the name of the instance plus the number of clients connected to that
 +instance. The client disregard information from servers not belonging to the
 +requested cluster. The client then chooses one of the instances with the
 +lowest number of clients. ​
 +
 +Since a client automatically can choose from all servers in a cluster one or
 +more Object Servers can be down with out changing the connection procedures.
 +However performance might suffer severely due to higher load on the fewer
 +servers. ​
 +
 +
 +===Setting up the server===
 +
 +
 +On the server manager select the server of interest and click settings. In
 +the advanced field write -cluster=<​my cluster name>. The cluster name can be
 +up to 10 characters long. 
 +
 +
 +===Setting up the client===
 +
 +
 +In the configuration tool choose the configuration of interest. In the
 +advanced field write -cluster=<​my cluster name>. The client setting for
 +connecting to an object server depends on two situations. The first
 +situation being both client and Axapta Object Servers being in the same
 +subnet. The second being client and Axapta Object Servers belong to
 +different subnets. ​
 +
 +Recall the settings in the configuration utility for connecting to an object
 +server:
 +
 +  *Axapta Object Server Mask
 +  *Axapta Object Server host names
 +  *Axapta Object Server IP Address masks
 +
 +When the client and Object Servers belong to the same subnet the above three
 +masks can be left blank. ​
 +
 +When the client and Object Servers belong to different subnets the IP
 +Address masks should contain the mask for the subnet the Object Servers
 +belong to. An example could be 192.88.253.255,​ where the last 255 specifies
 +that the search is done among servers in the subnet 192.88.253.*.
 +
 +Note: if client at any time receives only service response from Object
 +Servers within the same cluster it will automatically choose the least
 +loaded of theese servers without having to specify the cluster name in the
 +client configuration. This means that if your installation is one single
 +Axapta cluster, there is no need to change the existing configuration with
 +respect to cluster name. Just ensure that all relevant Object Servers are
 +located by client configurations network setup
 +----
 +Some facts about AOS clusters ​
 +For your information:​
 +  *When you have a SQL cluster for failover and the actual failover happens, the AOS will lose the connection to the SQL server and you have to restart the AOS service.
 +  *When you have an AOS cluster and you set it to start "On demand",​ it will not work. If the AOS instances are not running they will never start when clients try to connect. Sad but true. Maybe this will change when we get the new Dynamics Ax 4.0.
 +----
 +  *[[http://​axaptafreak.blogspot.com/​2005/​11/​some-facts-about-aos-clusters.html]]
 +  *[[http://​axaptafreak.blogspot.com/​2006/​05/​display-sessions-aos-name-in-online.html]]
axapta/кластерaos.txt · Последние изменения: 2018/04/13 22:43 (внешнее изменение)